Vidikron VP-6000a Flat Panel Television User Manual


 
Serial Communications
58 Vidikron PlasmaView Owner’s Operating Manual
PRE
L
IMINAR
Y
CTPS05 43 54 50 53 30 35 Sets COLOR TEMP. to HIGH.
CTRS00 43 54 52 53 30 30 Sets CHROMA EE to OFF.
CTRS01 43 54 52 53 30 31 Sets CHROMA EE to ON.
DBLS01 44 42 4C 53 30 31 Sets BLACK LEVEL for INPUT 2 to LOW.
DBLS02 44 42 4C 53 30 32 Sets BLACK LEVEL for INPUT 2 to HIGH.
DNRS00 44 4E 52 53 30 30 Sets the VIDEO NR to OFF.
DNRS01 44 4E 52 53 30 31 Sets the VIDEO NR to LOW.
DNRS02 44 4E 52 53 30 32 Sets the VIDEO NR to MIDDLE.
DNRS03 44 4E 52 53 30 33 Sets the VIDEO NR to HIGH.
DSGS01 44 53 47 53 30 31 Sets PLUG/PLAY setting for INPUT 2 to
PC.
DSGS02 44 53 47 53 30 32 Sets PLUG/PLAY setting for INPUT 2 to
VIDEO.
MCDS01 4D 43 44 53 30 31 Sets COLOR SPACE to RGB (VIDEO).
MCDS02 4D 43 44 53 30 32 Sets COLOR SPACE to COMPONENT1
(YCbCr).
MCDS03 4D 43 44 53 30 33 Sets COLOR SPACE to COMPONENT2
(YPbPr).
MNRS00 4D 4E 52 53 30 30 Turns MPEG FILTER OFF.
MNRS01 4D 4E 52 53 30 31 Sets MPEG FILTER to LOW.
MNRS02 4D 4E 52 53 30 32 Sets MPEG FILTER to MIDDLE.
MNRS03 4D 4E 52 53 30 33 Sets MPEG FILTER to HIGH.
PUCS00 50 55 43 53 30 30 Turns FILM MODE OFF.
PUCS01 50 55 43 53 30 31 Turns FILM MODE ON.
SFTS01 53 46 54 53 30 31 Sets the SIGNAL FORMAT to Type1.
SFTS02 53 46 54 53 30 32 Sets the SIGNAL FORMAT to Type2.
SFTS03 53 46 54 53 30 33 Sets the SIGNAL FORMAT to Type3.
SFTS04 53 46 54 53 30 34 Sets the SIGNAL FORMAT to Type4.
SFTS05 53 46 54 53 30 35 Sets the SIGNAL FORMAT to Type5.
SFTS06 53 46 54 53 30 36 Sets the SIGNAL FORMAT to Type6.
Table 6-1. Serial Commands (continued)
Command Value Range
Description
ASCII HEX Minimum Maximum
Notes:
1. When making input-specific adjustments such as to image quality, screen position/size or audio
sub-volume, select the input you wish to affect before making such adjustments.
2. These settings are not stored in memory.