Filter
Top Products
ViewSonic N3000w 27
Troubleshooting / Tips & Tricks
No power
• Make sure AC power button is ON, DC power button is ON (Blue LED)
• Make sure AC power cord is securely connected to the AC socket
• Plug another electrical device (like a radio) to the power outlet to verify that the outlet is
supplying the proper voltage
System is “Locked” or Not Responding:
• In the unlikely occurrence, press the “Up” key + AC power on to reset the monitor.
Parental Control password is “LOST”:
• In the unlikely occurrence, press the “Up” key + AC power on to reset the password.
AUDIO Interconnection Issues:
• DVI shares it’s Audio Input with RGB. If a User wishes to use RGB and DVI
inputs at the same time, use the OSD function, “DVI Audio From” described on p20.
• On AV1, AV2, and AV3; SVHS and Composite share the same Audio source.
Power is ON but no screen image
• Make sure the video cable supplied with the product is tightly secured to the video output port
on the back of the computer. If the other end of the video cable is not attached permanently to
the product, tightly secure it to the product
• Adjust brightness and contrast
• If you are using a Macintosh older than G3, you need a Macintosh adapter
• Check Source settings
Wrong or abnormal colors
• If any colors (red, green, or blue) are missing, check the video cable to make sure it is
securely connected. Loose or broken pins in the cable connector could cause an improper
connection
• Connect the product to another computer
• If you have an older graphics card, contact ViewSonic® for a non-DDC adapter
Control buttons do not work
• Press only one button at a time
Snow appears on screen
• Check your antenna connection
• Check TV / CATV selection
No sound
• Check your audio connection
• Press MUTE on the remote control again, so that MUTE disappears from the screen
• Check your audio settings, your TV audio may be set to SAP or minimum
• Press the Volume + (Up) key on your remote control
Make sure that headphones are not connected