ViewSonic N1800TV Flat Panel Television User Manual


 
ViewSonic N1800TV 9
1 Remove the battery cover by pulling then lifting the knob on the cover.
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery compartment.
3 Reattach the battery cover.
1. Insert Remote Control Batteries
CAUTION
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage,
which may pose a risk of fire or lead to personal injury.
Insert batterise according to (+) and (-) markings. Inserting the batteries
incorrectly may result in cracking or leakage, which may pose a risk of fire or
lead to personal injury.
Dispose of the battery in accordance with local laws and regulations.
Keep the battery away from children and pets.
When the remote control will not to be used for an extended period, remove
the batteries.
Installation
Connect one or all of the following into the back of the
N1800TV.
2. Connect audio and video cables to PC
PC RGB CONNECTION
Connect the supplied analog VGA cable from your
PC VGA OUT port to the N1800TV VGA IN port.
AUDIO CONNECTION
Connect the supplied stereo mini cable from the
PC’s AUDIO OUT port to the AUDIO IN port
on the N1800TV.
Important: Make sure all devices are off before you
begin.