ViewSonic VT2405LED Flat Panel Television User Manual


 
ENGLISH
27
ViewSonic VT2205LED/VT2405LED
Using the Teletext function
Press TEXT/MIX on the remote control to display Teletext, and again to turn it off.
Teletext is only available when ATV is selected as the input source, and a signal
which transmits Teletext is currently displayed. Not all TV stations and video signals
broadcast Teletext. If in doubt, please contact the TV station.
When Teletext displays on-screen, you can:
TEXT/MIX/PICTURE
• In TV Mode: Press the TEXT/ MIX/ PICTURE button to enter the Teletext mode.
• In TELETEXT Mode: Press the button again to superimpose a Teletext broadcast onto the
screen of current TV program (mixed Mode).
• In MIXED Mode: Press the button again to return back to the normal TV Screen (current
program).
SUBCODE
When a selected Teletext page with hidden sub pages or timed pages, these pages can be
seen by the following manner:
• Press the sub code button. Screen will show « /_ _ _ _ ».
• Enter 4 digits number button corresponding to the sub page desired. E.g. 0001 for sub
page number 1.
• Wait until the page appears.
UPDATE
• Input a page number, and then press this button. The teletext page will be closed and will
show the update symbol+- on the top left corner. When the update symbol changes to the
page number, it means the page is complete downloaded.
• Press this button again to open the teletext page.
HOLD
• Press this button to remove the information from the display and stop the automatic page
change which will occur if a teletext page consists of 2 or more sub pages.
• To continue press this button again. The number of sub pages and the sub page displayed
is, usually, shown on the screen below the time. When this button is pressed the stop
symbol is displayed at the left-top corner of the screen and the automatic changing is
inhibited.
REVEAL
• Press this button to display concealed information, such as solutions of riddles or puzzles.
• Press this button again to remove the information from the display.
SIZE
Select double height text under Teletext mode for full screen.
• Press this button to enlarge the top half of the page.
• Press this button again to enlarge the bottom half of the page.
• Press this button again to return to the normal display.