Filter
Top Products
Introduction
2. Rear View
&
Service _ _2_
_ IIE_la_l ...... oo._×
1. AC POWER IN: Connect to an earth 100-240V, 50/60Hz AC outlet with the PowerCable.
2. POWER SWITCH: Switch on or off the power suply.
3. HDMII/2: Connect them to the video output terminal of DVD.(used in HDTVl mode)
4. PC AUDIO IN: Connect it to the audio output terminal of PC.
5. VGA: For PC display. Connect it to the D-Sub 15 pins analog output connector of the PC.
6. YPbPr : Connect them to the video output terminal of DVD.(used in HDTV mode).
7. VIDEO IN 1/2: Connect it to video output terminal of DVD.
VIDEO L/R in 1/2: Connect them to audio output terminal of DVD.
8. VIDEO out: Connect it to other TV'S video intput.
VIDEO L/R out: Connect them to other TV'S audio input.
9. S-VIDEO: S-Video signal input.
10. COAX: Digital coaxial output.
11. RF: Connect antenna or cable 75 Ohm coaxial to receive TV signal.
12. Service: USB port for service.
Power on
• To turn on the LCD TV
Press on the LCD TV to _ first.
• Be sure to turn off the power and unplug both units from the wall outlet before making any connections.