Filter
Top Products
4
17
The first time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord should
be connected to an electrical outlet.
• Your devices should be connected.
• If you have a wireless network, have the network key
ready.
• If you are connecting to your network with an ethernet
cable, connect it to the ethernet port on the TV.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote. The TV
powers on and the Setup App
starts.
2. Use the Left/Right Arrow
buttons on the remote to
highlight Home Use and press
OK.
3. Use the Up/Down Arrow
buttons on the remote to
highlight Home Mode Setup
and press OK.
Completing the First-Time Setup
4. Use the OK and Arrow Up/
Down buttons on the remote to
read and accept the Terms of
Service and Privacy Policy for
Yahoo! TV Widgets.
When you are finished,
highlight Next and press OK.
5. Select the name of your
wireless network from the list of
available networks and press
OK.
Enter the network key using
the on-screen keyboard, then
highlight Connect and press
OK.
6. Enter your First Name, Last
Name, Phone Number, ZIP
Code, and E-mail Address
using the on-screen keyboard.
Highlight Next and press OK.
7. Answer the on-screen
questions about your TV
connection using the Arrow
and OK buttons on the remote.
8. When you have finished the
channel scan, highlight Exit to
Live TV and press OK.
The First-Time Setup is complete.