Vizio E420VP Flat Panel Television User Manual


 
16
5
E370VP/E420VP
Adjusting the Picture Size and Position
When displaying an image from the HDMI or RGB input, the size and position of
the display image can be adjusted.
To adjust the picture size and position:
1. Ensure the input is set to HDMI or RGB.
2. From the Picture Settings menu, use the Arrow buttons on the remote to
highlight More, then press OK.
3. Use the Arrow buttons on the remote to highlight Size & Position, then
press OK. The Size & Position menu is displayed.
4. Use the Arrow buttons to highlight the setting you wish to adjust, then
press Left/Right Arrow to change the setting:
• Auto Adjust-Automaticallyadjustsdisplayimagetooptimalsizeand
position.(RGBinputonly.)
• Horiz. Position-Adjuststhehorizontal(left/right)positionofthe
displayimage.
• Vertical Position-Adjuststhevertical(up/down)positionofthe
displayimage.
• Horizontal Size-Adjuststhewidthofthedisplayimage.
• Fine Tune-Adjuststheheightofthedisplayimage.(RGBinputonly.)
5. When you have finished adjusting the color temperature, press the EXIT
button on the remote.
Resetting the Picture Settings
To reset the picture settings to the factory default settings:
1. From the Picture Settings menu, use the Arrow buttons to highlight More,
then press OK.
2. Use the Arrow buttons on the remote to highlight Reset Picture Mode,
then press OK. The TV displays, “Are you sure you want to RESET Picture
Settings to the factory defaults?”
3. Highlight Yes and press OK.
4. Press the EXIT button on the remote.
Adjusting the Audio Settings
To adjust the audio settings:
1. Press the MENU button on the remote.
The on-screen menu is displayed.
2. Use the Arrow buttons on the remote
to highlight Audio and press OK. The
Audio Settings menu is displayed.
3. Use the Arrow buttons to highlight
the setting you wish to adjust, then
press Left/Right Arrow to change the
setting:
• Balance-Adjuststheloudnessof
theaudiooutputfromtheleftand
rightspeakers.
• Lip Sync-Adjuststhesynchroni-
zationbetweenthedisplayimage
andtheaccompanyingaudio
track.
• TV Speakers-Turnsthebuilt-in
speakersonoroff.
• Advanced Audio-See
AdjustingtheAdvancedAudioSettings
on
page17.
• Equalizer Settings-Adjuststheboostorattenuationofdifferent
frequencies.(ThissettingisonlyavailablewhenSRSTruSurroundHDis
settoOff.)ChangetheequalizerpresetsbyselectingFlat,Rock,Pop,
Classical,orJazz.Tochangetheequalizersettingsyourself,highlight
EQ ModeandpressOK.
• Reset Audio Mode-Restorestheaudiosettingstothefactory
defaults.See
ResettingtheAudioSettings
onpage17.
4. When you have finished adjusting the audio settings, press the EXIT button
on the remote.