Filter
Top Products
5
23
ADJUSTING THE AUDIO SETTINGS
To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The Audio Settings
menu is displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/
Right Arrow to change the
setting:
• Balance - Adjusts the
loudness of the audio
output from the left and
right speakers.
• Lip Sync - Adjusts the synchronization between the
display image and the accompanying audio track.
• TV Speakers - Turns the built-in speakers on or off.
• SRS StudioSound HD - StudioSound HD™ is a
feature-rich surround sound solution which delivers
an immersive surround sound experience from the
TV’s internal speakers. Additionally, StudioSound
HD completes the entertainment experience by
maintaining a steady volume while watching
programming and movies, providing deep, rich bass,
and delivering crisp details and clear, intelligible
dialog. Select Surround or Standard.
• SRS TruVolume - TruVolume™ intelligently normalizes
volume fluctuations due to television commercials or
channel changes. Select On or Off.
• Advanced Audio - See
Adjusting the Advanced Audio
Settings
on page 24.
• Equalizer Settings - Adjust the boost or attenuation of
different frequencies. Change the equalizer presets
by selecting Flat, Rock, Pop, Classical, or Jazz. To
customize the equalizer settings yourself, set EQ Mode
to Advanced, then adjust each frequency or set EQ
Mode to Basic, then adjust Bass and Treble settings.
(This setting is only available when SRS StudioSound
HD is set to Standard)
• Reset Audio Mode - Restores the audio settings to the
factory defaults. See
Resetting the Audio Settings on
page 25.
4. When you have finished adjusting the audio settings,
press the EXIT button on the remote.