Filter
Top Products
VIZIO E422VA User Manual
44
www.VIZIO.com
Settings Menu
Input Source
Select the Input Source for your HDTV. Choose from TV, AV
(Composite), Comp (Component), HDMI-1, HDMI-2, HDMI-3,
HDMI-4, and RGB (VGA).
Settings Menu
When you first turned on your HDTV you scanned for channels using the
Setup App. If you did not do this or if your setup has changed, you can
do this from the Tuner menu.
Note: The tuner option can only be selected when your HDTV is in TV
input mode.
Tuner Mode
Select Cable or Antenna depending upon which source you have attached to the DTV / TV Input.
Auto Channel Search
Automatically search for TV
channels that are available in your
area. Be sure to first select the
correct tuner mode above. The TV
will search for analog and digital
channels. When the search is done,
press EXIT to begin watching your
programs.
Partial Channel Search
If you believe channels are missing
from the auto search, you can do a
partial channel search to look for
channels in a certain channel range
again. Select to scan for Analog,
Digital, or both Analog/Digital
channels, and then select From Channel, To Channel and then select Start. For a listing of
digital TV stations in your area, visit www.antennaweb.org.
Add Analog Channel
Manually add missing channels. Enter the channel number, and then select Add Channel to add
that channel to your list of available channels.