Vizio E650i-A2 TV Antenna User Manual


 
HELP TOPICS
How do I return to
the Setup App?
There is a picture,
but there is no
sound.
The TV displays
“No Signal.”
There are black/
gray bars on the
top/bottom/sides
of the screen.
There is no power.
The on-screen menu has guided setup. Press MENU > Guided Setup. Select the
type of setup you need and press OK. The Setup App begins.
To reset the TV to factory defaults, press MENU > System > Reset & Admin >
Reset TV to Factory Defaults. Enter the Parental Control Passcode (the default
code is 0000). Select Reset. Remember that all of your settings will be lost.
Press the VOLUME UP button on the remote.
Press the MUTE button on the remote to ensure that mute is off.
Press MENU, then select Audio. Be sure TV Speakers is set to On.
Be sure your connected devices are turned on.
Press the INPUT button on the remote and select the input to which your
device is connected (HDMI-1, COMP, etc).
Note that some television channels add black bars to the picture.
Set the TV image mode so that the picture fills the screen. Press the WIDE
button on the remote until the screen is filled, and then press OK.
Adjust the video settings of your external device.
Be sure the power cord is securely connected to the AC socket on the TV and
to a working electrical outlet.
Press the POWER button on the remote or on the side of the TV.
If the above steps do not work, try plugging the power cord into a different outlet.
V.I.A. Plus is
not working.
Be sure your TV is connected to an Internet connection.
Restart the App by pressing the EXIT button to close the App, then open the App.
Restart your TV by pressing the POWER button on the remote, then turn it back on.