Filter
Top Products
VIZIO M220NV User Manual
Version 7/22/2010 39
www.VIZIO.com
Equalizer Settings
To select the options in the Equalizer
Settings sub-menu, press OK. A new
menu will be displayed showing the
available equalizer functions. Press ◄
or ► to select Basic or Advanced.
EQ Mode (Basic)
Adjust Bass and Treble.
EQ Mode (Advanced)
Adjust boost or attenuation of
different frequencies.
Starting from lowest to the highest,
they are 100 Hz, 300Hz, 1 kHz, 3
kHz and 10 kHz.
1. Press ▼ then◄ or ► to
select the frequency to be
adjusted. Press OK.
2. Press ▲ or ▼ to adjust the
selected frequency to your
preference. Values above 0 will boost the frequency and values below 0 will attenuate the
frequency.
Note: The Equalizer adjustment will only be available when SRS TSHD is set to Off.
Tuner
When you first turned on your HDTV you scanned for channels using the Setup App. If you did not do this
or if your setup has changed, you can do this from the Tuner menu.
Note: The tuner option can only be selected when your HDTV is in TV input mode.
Tuner Mode
Select Cable or Antenna depending
upon which equipment you have
attached to the DTV / TV Input.
Auto Channel Search
Automatically search for TV channels
that are available in your area. Be
sure to first select the correct tuner
mode above. The TV will search for
analog and digital channels. When the
search is done, press EXIT to begin
watching your programs.