Filter
Top Products
VIZIO VO37L HDTV10A User Manual
Version 2/28/2008 12
www.VIZIO.com
1.5
1.51.5
1.5 VIZIO Remote Control
VIZIO Remote ControlVIZIO Remote Control
VIZIO Remote Control
GUIDE – This button displays program information. Press this button once when in TV mode and the
information of the program being viewed is shown. Press it a second time and the Electronic
Programming Guide will appear in the screen. In any other mode when this button is pressed, the screen
will display the selected input plus the definition of the signal; i.e. HDMI 720p, HDMI 1080i, etc.
POWER – Press this button to turn the TV on from the Standby mode. Press it again to return to the
Standby mode.
HDMI – Press this button to select the HDMI input.
MUTE – This button turns the sound on and off.
TV – Press this button to select TV.
COMPONENT – Press this button to select the Component
(YPbPr) input.
LAST – This button recalls the previously viewed channel. If the
On-Screen Display (OSD) menu is being used, this button will allow
you to get back to previous menu screen or out to your program
when you press it repeatedly.
AV – Press this button to select AV (either Composite or S-Video)
input.
(MENU) – Use this button for the On-Screen Display (OSD)
menu. When it is used within a menu selection, the
V
ball key will
help you to make the selection of the feature to be adjusted after it
has been highlighted.
-These labeled buttons are used to navigate the OSD menu.
When navigating the OSD menu, the arrows control the
direction up and down or left and right. They will also be used
as value settings when the slide bar is shown on the screen
and option settings to turn a feature off or on. During regular
TV watching these keys will provide us with the control
functions of Volume (up or down) and Channel (up or down).
Channel up or down will not function when a cable box or satellite
receiver is being used as the source of the signal.
PIP – Use this button to activate the Picture-in-Picture mode.
SWAP – Used to swap the inputs from the main screen and the
sub-screen while in PIP mode.
FREEZE – Press this button to “freeze-frame” the current screen.
Press this button again to continue playing.
hen
NUMBER BUTTON PAD – Use these buttons to select a channel
or enter a password.