Filter
Top Products
VIZIO VO42L FHDTV10A User Manual
Version 2/27/2008 45
www.VIZIO.com
4.3.3
4.3.34.3.3
4.3.3 Balance
BalanceBalance
Balance
Press the button to highlight the Balance selection.
Press the button to start adjusting the balance and the menu page will disappear and be replaced by a
small Balance Indicator Bar, as before, so you can see the balance adjustment to the left or right of the
nominal position.
Use the or button to adjust the left/right balance.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
4.3.4
4.3.44.3.4
4.3.4 Surround
SurroundSurround
Surround
Press the button to highlight the Surround
selection.
Press the button to select for the simulated
surround sound feature to be On or Off.
Once the adjustments are completed press the
LAST button repeatedly to exit the OSD
completely.
4.3.5
4.3.54.3.5
4.3.5 Digital Audio Out
Digital Audio OutDigital Audio Out
Digital Audio Out
Press the button to highlight the Digital Audio Out selection.
Press the or button to make the proper selection. The options are OFF, Dolby Digital and PCM.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
4.3.6
4.3.64.3.6
4.3.6 Speakers
SpeakersSpeakers
Speakers
Press the button to highlight the Speakers selection.
Press either or button to turn the internal speakers On or Off. You may want to turn-off the
internal speakers when listening to the audio through your Home Theatre System.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.
4.3.7
4.3.74.3.7
4.3.7 Audio Out
Audio OutAudio Out
Audio Out
Press the button to highlight the Audio Line Out selection.
Press either or button to turn the audio out signal to Fixed or Variable. When it is set to
variable, volume from the external speakers will change according to the volume setting on the TV. If it is
fixed, the volume can only be changed by the settings on the external stereo system.
Press the LAST key once to return to the previous screen or repeatedly to return to your program if task
has been completed.