Vizio VO42LFHDTV10A Flat Panel Television User Manual


 
VIZIO VO42L FHDTV10A User Manual
Version 2/27/2008 28
www.VIZIO.com
If your sound system has a SPDIF (optical) digital audio input you can connect it to the optical DIGITAL
AUDIO OUT (white area) at the rear of the LCD HDTV. This is active when receiving digital audio with
the program being viewed no matter what input (TV, AV, Component or HDMI) is being used.
2.8
2.82.8
2.8 Connecting a PC Computer
Connecting a PC ComputerConnecting a PC Computer
Connecting a PC Computer
1. Turn off the power to the HDTV and PC Computer.
2. Connect a 15-pin D-Sub RGB (VGA) cable to the
RGB output of your pc computer and the other
end to the RGB PC input (blue area) at the rear of
the HDTV.
3. Connect the Audio Out on your pc computer to the
RGB PC Audio input (blue area) at the rear of the
HDTV. This connection must have a 1/8’ stereo
mini plug at one end of the cable to fit into the
computer’s input jack.
4. Turn on the HDTV and PC Computer.
5. Select RGB using the INPUT button on the remote or side of the HDTV.
Note:
a) For the best picture quality when connecting a pc computer through RGB PC, please refer
to the pc or graphic card’s user guide to find out if it is capable of an output of 1920x1080
at 60Hzwhen using the parameters and values given to you on Section 2.8.2 of this User’s
Manual by way of VESA Reduce Blanking timing.
b) A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at
an electronics store.