Filter
Top Products
VIZIO VU32L HDTV10A User Manual
Version 3/28/2008 6
www.VIZIO.com
Preparing Your LCD HDTV for Wall Mounting
Preparing Your LCD HDTV for Wall MountingPreparing Your LCD HDTV for Wall Mounting
Preparing Your LCD HDTV for Wall Mounting
To remove the stand base
To remove the stand baseTo remove the stand base
To remove the stand base
1. Unplug all of the cables and cords
from your VU32L HDTV10A.
2. Place the VU32L HDTV10A face
down on a soft and flat surface
(blanket, foam, cloth, etc) to prevent
any damage to the TV.
3. Push up the plastic panel on the back
of the stand and lift it away once to
release.
4. Remove the eight (8) screws that
were hidden by the panel, while
holding the base.
5. Carefully remove the stand base.
Now, the VU32L HDTV10A can fit securely to
a mount (sold separately) by utilizing the
mounting holes in the center of the back panel
of the TV. Please make sure to read the
instructions of your specific mount to properly
hang the VU32L HDTV10A.
The pitch of the mounting holes is 400mm
horizontally and 200mm vertically.
The screw type required is metric M6, 1.00mm
pitch. The length of the screws will depend on
the thickness plate being attached to TV set,
our brackets come with different length
screws.
To find the perfect mount for the VIZIO VU32L HDTV10A, browse VIZIO’s certified mount selection at
www.VIZIO.com or call directly 888-VIZIOCE (888-849-4623).