Vizio VX37LHDTV10A Flat Panel Television User Manual


 
VIZIO VX37L HDTV10A User Manual
Version 1/25/2007 22
www.VIZIO.com
2.6.2 Using Your Antenna or Cable for TV
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your antenna or
cable (out-of-the-wall, not from the Cable Box) to the
DTV/TV CABLE/ANTENNA connector at the rear of the
HDTV
3. Turn on the power to the HDTV.
4. Select TV using the INPUT button on the remote or side of
the HDTV, or directly by pressing the TV button on the
Remote Control.
2.6.3 Using the Antenna or Cable through your VCR
1. Turn off the power to the HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna Out”
connector on the rear of your VCR to the DTV/TV
CABLE/ANTENNA connector at the rear of the HDTV.
3. Turn on the power to the HDTV and VCR.
4. Select TV using the INPUT button on the remote or side of
the HDTV, or directly by pressing the TV button on the
Remote Control.
Note: If you have an off-air antenna or cable TV, connect
it to the “Antenna In” connector on the rear of your VCR.