VTech VT181CHE-IR CRT Television User Manual


 
VT181CH / VT181CHE User Guide 150-066
1. Remove the original CRT display monitor. Keep the two "L" shaped brackets.
These brackets will be used to mount the flat display.
Included with the display are a set of brackets for both upper and lower tier mounting.
2. Remove the original front console bezel and 20" curved IR touch frame.
3. Install the new replacement console bezel with the original four screws.
The new console bezel is complete with the new flat IR touch frame.
4. Connect the new touch cable per section 4.1
5. Mount the display to either the lower tier slide tray or the upper tier fixed tray using the supplied
brackets. Position the display to the rear of the flat IR touch frame. For lower tier applications,
replace the tray stop bolts with the longer supplied stop tubes and bolts and secure.
6. Connect the membrane extension cable to the membrane tab that projects through the console bezel.
7. Connect the video cable per section 2.5
8. Connect the power cord to the display and select the power switch to ON
9. Turn on the station main power switch and boot the system
10. Make any OSD adjustments if required per section 3.1
1. Remove the original CRT display monitor.
2. Remove the original front console bezel and 20" curved IR touch frame.
3. Install the new replacement console bezel with the original four screws.
The new console bezel is complete with the new flat IR touch frame.
4. Connect the new touch cable per section 4.1
5. Mount the display to the rear of the lower tier or upper tier replacement console bezel using the
supplied screws.
6. Connect the membrane extension cable to the membrane tab that projects through the console bezel.
7. Connect the video cable per section 2.5
8. Connect the power cord to the display and select the power switch to ON
9. Turn on the station main power switch and boot the system
10. Make any OSD adjustments if required per section 3.1
MOUNTING INSTRUCTIONS
MOUNTING INSTRUCTIONS
7.1
Mounting Procedure - Tray Mount
13
7
Section
Mechanical Drawings
Model Description Page(s)
VT181CH/CHE Tray Mount 14-15
VT181CH/CHE Flush Mount 16-17
7.2
Mounting Procedure - Flush Mount
Note:
For display upgrade only when replacing the flat screen Sony monitor, omit step 2, step 3, and step 4.