Filter
Top Products
Q-PON CUTTER
18
Trouble Possible Cause Remedy
SECTION VII TQ 1.0 TROUBLE SHOOTING
Motor Will Not Run .........................Power Unit Not Connected ............................. Check Power Cord & Connection
Premature blade life ....................... Improper Speed or Gear Box Setting ............Refer to Speed Control & Gear Box Info.
Difficult Rotation Resulting In........ Dull or Chipped Saw Blade .............................. Replace Saw Blade
Poor Workpiece End Quality
Workpiece Rotates During Cut ........ Loose Vise Clamp............................................ TIghten Vise Clamp
Saw Blade Will Not Cut ...................Improper Saw Blade Direction ......................... Change Saw Blade Rotation Direction