Filter
Top Products
14
CHECK FOR GAS LEAKS
Figure 26
(a)
(b)
(c)
(d)
(e)
View from below
(f)
WARNING: Do not ignite burners while checking
for leaks.
Check for leaks by wetting the connections with the soap
and water solution and watching for bubbles. If bubbles
form or if a bubble grows there is a leak.
Check:
a) Hose to manifold connection. Figure 26 (a).
WARNING: If there is a leak at connection a, retighten
the fitting with a wrench and recheck for leaks with
soap and water solution.
If a leak persists after retightening the fitting, turn
OFF the gas. DO NOT OPERATE THE BARBECUE.
Contact your dealer.
b) Manifold to side burner hose connection.
Figure 26 (b).
c) Valves to manifold connections. Figure 26 (c).
d) Hose to quick disconnect connection. Figure 26 (d).
e) Side burner supply line to side burner orifice
connection. Figure 26 (e).
f) Side burner hose to side burner valve, and side
burner supply line to side burner valve. Figure 26 (f).
WARNING: If there is a leak at connections
b, c, d, e or f, turn OFF the gas. DO NOT OPERATE
THE BARBECUE. Contact your dealer.
When leak checks are complete, turn gas supply OFF at
the source and rinse connections with water.