Filter
Top Products
I
’
Troubleshooting
Performance problems often result from little things you can find and fix yourself, without tools
of any kind. Check the chart below for problems you can fix. It could save you the cost of a
service call.
PROBLEM
; POSSIBLE SOLUTION -
----
-
/
Unit starts j Check if Delay Start is set. See pages 13-15 for more information
unexpectedly , I on TIMED MODE Operations.
Unit stops
Check if Delay Stop is set. See pages 13-l 5 for more information
unexpectedly on TIMED MODE Operations.
Make sure unit is plugged into a live circuit with proper voltage.
Check if a household fuse has blown or the circuit breaker tripped.
Make sure unit is turned on.
See if the local power has failed.
Unit does not
respond to
remote control
Replace the batteries in the remote control. If this does not work,
call for service on your remote control.
Unit does not
remember your
cycle settings
Every time you replace the batteries or cut the power to the remote
control, your SElTING Buttons lose their settings and the time of
day setting. You will have to reset the SElTING Buttons and the
time of day.
Obtaining Service
If the problem is not due
to an item listed in the
chart above . . .
Contact the dealer from whom you pur-
chased the unit or an authorized Whirlpool*
service company.
* Registered Trademark of Wh~rtpool Corporation, U.S.A
17