Filter
Top Products
MAN127F
Lanyard Clip Installation
For hands-free operation of the RX22-4 receiver, use the
provided lanyard clip to secure the unit on your lanyard,
pocket or pants.
To Install: Position the lanyard clip on the rear of the RX22-
4 receiver as shown in Figure 3A. Turn the lanyard clip 180°
left or right as shown in Figure 3B. The lanyard clip is now
installed and ready for use.
To Remove: Turn the lanyard clip 180° so the edge points
toward the top of the unit as shown in Figure 3A. Gently pull
the lanyard clip away from the unit to remove.
Figure 3: Lanyard clip installation
A189
Figure 3A Figure 3B