Filter
Top Products
Installation 5
MAN0094 (11/15/2002)
SUB-FRAME INSTALLATION Cont’d
Always wear relatively tight and belted cloth-
ing to avoid entanglement in moving parts. Wear
sturdy, rough-soled work shoes and protective
equipment for eyes, hair, hands, hearing, and
head; and respirator or filter mask where appro-
priate.
Figure 1 Sub-Frame Clearance
Tractor Preparation
NOTE: For installing this sub-frame, reference to
right, left, forward and rearward directions are deter-
mined from the operator’s position in the tractor seat.
NOTE: Leave all hardware loose until sub-frame
weldment has been fit up.
1. Refer to the WOODS BH6500/7500 Backhoe
Operator’s Manual for backhoe assembly instruc-
tions.
2. Remove the tractor top link, 3-point lift lower
arms, and anti-sway links.
3. Remove lower arm pivot pins. Keep the hardware
for attaching rear hangers.
For Tractors with Kubota LA852-1 and LB702 or
Woods 1009, 1012, 1016 Loaders.
4. Remove loader crossbar assembly from between
right and left loader mounts.
CAUTION