Woods Equipment 2WD TV Mount User Manual


 
10 Installation
MAN0094 (11/15/2002)
SUB-FRAME INSTALLATION Cont’d
Attach Sub-Frame to Backhoe
1. Align six holes on the backhoe with holes on sub-
frame.
2. Secure with six cap screws (27), hardened flat
washers (26), and hex nuts (25) as shown.
3. Tighten according to specifications given below.
25. 1450 3/4 Hex nut
26. 57798 3/4 Hardened flat washer
27. 735 3/4 NC x 2 Cap screw
Figure 12 Sub-Frame to Backhoe Hardware
Figure 13 Sub-Frame to Backhoe Installed
2
7
2
6
2
5
CD6130-3
252627
DP8
TORQUE SPECIFICATIONS
Cap Screw Qty
Wrench
Size Required Torque
3/4 NC x 2-1/4 6 1-1/8” 297 lbs.-ft. (403 N-m)