Filter
Top Products
6 Installation
MAN0094 (11/15/2002)
SUB-FRAME INSTALLATION Cont’d
Install Front Mount
For Tractors with Kubota LA852 and LB702 or
Woods 1009, 1012, 1016 Loaders (Figure 2)
1. Install front hanger (2) to bottom of tractor
between right and left loader mounts using two
cap screws (18) and flat washers (17).
2. Secure front hanger to right side of loader mount
using three cap screws (22), flat washers (19)
and hex nuts (24).
3. Insert spacer (9) between left loader mount and
front hanger. Secure using three cap screws (23),
flat washers (19) and hex nuts (24).
For Tractors without Loader (Figure 3)
4. Install mounting plates (3) to sides of tractor
housing, using six cap screws (20, three per side)
and flat washer (19).
5. Install front hanger (2) between mounting plates
and secure to bottom of tractor two using cap
screws (18) and flat washers (17).
6. Secure front hanger to right mounting plate using
three cap screws (22), flat washers (19) and hex
nuts (24).
7. Insert spacer (9) between left mounting plate and
front hanger. Secure using three cap screws (23),
flat washers (19) and hex nuts (24).
2. 1000556 Front hanger
3. 1000562 Mounting plate
9. 1004627 Spacer
17. 57816 1/2 Hardened flat washer
18. 65505 M12 x 1.25P x 30mm Cap screw
19. 46070 9/16 Hardened flat washer thick
20. 64084 M14 x 1.5P x 30mm Cap screw
22. 23138 M14 x 1.5P x 45mm Cap screw
23. 307359 M14 x 1.5P x 70mm Cap screw
24. 43104 M14 x 1.5P Hex nut
Figure 2 Front Hanger Assembly Installed
with Loader Mount
Figure 3 Front Mount Installation
without Loader Mount
18
17
22
19
24
23
19
24
9
2
DP1
1
9
2
0
2
3
1
9
2
4
1
8
1
7
2
3
9
2
2
3
CD6160-1