Filter
Top Products
8 Installation
MAN0094 (11/15/2002)
SUB-FRAME INSTALLATION Cont’d
Install Rear Mount
1. Slide rear mount (5) into slots of rear hanger
bracket (4).
2. Pivot rear mount upward and secure to tractor
with clevis pins from lower lift arms (removed dur-
ing tractor preparation).
4. 62977 Rear hanger bracket
5. 1004628 Rear mount
Figure 6 Rear Mount Installation (Typical)
Figure 7 Rear Mount Installed
Sub-Frame Fit-Up
1. Center sub-frame under tractor.
2. Insert cross tube of sub-frame into channel of rear
hanger as shown in Figure 8.
3. Install clevis pins (8) and hair pins (15) to secure
in rear mount as shown in Figure 9.
8. 37827 Clevis pin, .75 x 3.14
15. 2688 Hair pin cotter, 5/32
Figure 8 Sub-frame to Rear Mount Connection Figure 9 Clevis Pins Installed
5
4
Clevis Pin
LA1
DP3
CD6130-4
1
5
8
5
8
15DP2