Filter
Top Products
6 Chapter 2
9. (a) Align the cover screw tabs with screw holes and press downward; (b) slide cover
toward the front of the thin client, as shown in Figure 5.
Figure 5 Reattaching the cover
10., Attach the screws in the reverse order as described in step 3.
11. Connect the power cord and power adapter, attach any other cables to the thin client,
attach the vertical foot, and then press the power button to turn on the thin client.
12.After the thin client reboots, you can verify that your general client information (for
example, the Client Information or System Information dialog box information) is
correct. After verification, the thin client is ready for operation and setup by an
administrator.
Tip
Administrator and other documentation for your thin client model are
available at: http://www.wyse.com/manuals
.