Filter
Top Products
2120
LEARNING
Your UR86A Remote has the codes for
most TVs, VCRs, etc. in its code library.
However, if the code for your particular
device is not found in the library, you can
learn these codes from your existing
remote. Or if you find a code from the
code tables included with this owner’s
manual that “almost” matches your
device, but a few buttons are missing, you
can learn just those buttons.
1. Point your existing
remote at the
UR86A Remote with
a distance of about 1
inch between the
remotes.
2. Press and hold
SETUP until the
LED indicator lights
steadily. Release the
Setup button.
3. Press the mode
button that matches
the equipment you
want to learn. The
LED blinks once.
4. Press and release the
LEARN button. The
LED blinks once.
5. Press and release the
button on the
UR86A Remote that
you want to teach.
(e.g. POWER) The
LED blinks once.
6. Press the button on
your existing remote
that you want to
learn. Hold the
button until the LED
on the UR86A
Remote blinks off.
I
DENTIFYING
C
ODES
FOUND
USING
THE
S
EARCH
P
ROCEDURE
2. Press the mode
button that matches
the equipment you
want to identify
The LED blinks
once.
3. Press and release
SETUP. The LED
blinks once.
4. To find the first
digit, press each
number button from
0 to 9 until the LED
blinks. The number
you pressed is the
first digit of the
code.
5. Press each number
button from 0 to 9
again as above to
find the second digit.
6. Press each number
button in turn to find
the third digit. When
the third digit has
been found, the LED
will go out.
1. Press and hold
SETUP until the
LED indicator lights
steadily. Release
Setup button.