Filter
Top Products
- 4 -
STEP 3
Select the type of device of source component you wish to
control.
Press “Next” to continue.
STEP 4
A button layout for the respective device type chosen will
appear.
From these template files, you can select from an
assortment of colors schemes and styles.
Press “Next” to continue.
STEP 5
Now the IR command group can be verified. With an
XTR39 plugged into the USB port, direct the front end
towards the source component.
Press “TEST” and verify the source component either turns
on or turns off.
Move down the command group list and select a new IR
command group if the source component does not turn on
or turn off. Repeat until source component can be
controlled. You have now determined the correct IR
command group.
Press “Next” to continue.