Filter
Top Products
- 8 -
- HEX-IR SUPPORT -
STEP 1
In the Palette Editor window, set the
“Mode” to “Edit”.
Scan down the list of manufacturers
and source types. Click on “HEX” and
move over to the right screen where
the function
commands are.
STEP 2
Click on a function
command and right-
click the mouse. A
menu list will appear.
Select “Record”.
A new window will appear titled
“Discrete Command”.
STEP 3
The “Discrete Command” window is
where you can enter the HEX
commands.
Copy-and-paste from where you found
the HEX commands works best.
Press “OK” to continue.
Note: You must have the latest firmware installed to use HEX-IR commands.
MRC44, MRAUDIO4X4 (Version 3.23)
MRC88, MRAUDIO8X8 (Version 2.17)
SPLCD39G, SPLCD64G, SPLCD64V (Version 1.58)
XTR39 (Version 1.20)
RF2IR (Version 1.11)
Where to find HEX IR Codes?
Visit www.remotecentral.com. Either do a search for your component or visit the interactive file area.
Most HEX IR codes can be found in the Pronto forum section.