Xantrex Technology 976-0212-01-01 Rev A Universal Remote User Manual


 
RC/GS
2 976-0212-01-01
Batt. Full LED Indicator
The Batt. Full LED indicator table on page 28 has the following correction:
The Batt. Full indicator LED is solid when the battery is charged 90% or
higher (not flashing).
Inverter Mode Messages
The “Note” callout on page 34 of this section has the following correction:
The LED indicator does not flash during the charge mode if the inverter is
turned on.
Charge LED
Indicator Other LED Indicators or Devices Meaning
Solid Bulk charging
Solid
Absorption charging
a
a.The Batt. Full LED indicator will be solid when the battery state-of-
charge (SOC) is between 90 and 100% according to the inverter/
charger's estimate. See “Absorption Charging” on page 3 and in the
owner’s manual.
Solid Batt. Full LED indicator solid Float charging
Flashing Equalize charging
Off No charging
Batt. Full LED
Indicator Other LED Indicators or Devices Meaning
Solid Battery fully charged (100%)
Solid Charge LED indicator solid Battery charged 90% or higher
Off Battery below 90% charge
Note:
The Inverter LED indicator does not flash during the charge mode if the inverter
is turned on. The Inverter LED indicator turns off if the inverter is turned off.