Filter
Top Products
Description of the Software Programs
NUAGE FADER Operation Manual 23
Description of the
Software Programs
NUAGE FADER Setup
Overview
This software is for configuring the general settings of
Nuage Fader from Nuendo. You can configure settings
such as touch sensitivity or LED brightness. To open this
window, click the Nuendo menu “Devices” “NUAGE
FADER Setup.”
When multiple Nuage Fader units are connected, the
settings are the same on all Nuage Fader units.
Controls and Functions
Knob
Adjusts the touch sensitivity of the [Multi function knob].
The larger the number, the higher the sensitivity.
Slider
Adjusts the touch sensitivity of the [Touch slider bar]. The
larger the number, the higher the sensitivity.
Fader
Adjusts the touch sensitivity of the [Fader]. The larger the
number, the higher the sensitivity.
LED Low
Adjusts the brightness of the LED (when dimmed). The
larger the value, the brighter the LED.
LED High
Adjusts the brightness of the LED (when fully lit). The
larger the value, the brighter the LED.
OLED
Adjusts the brightness of the [Channel name display]. The
larger the value, the brighter the LED.
Follow Slider Scroll
Turns on and off the function which causes the [Fader]
position to follow scrolling through the channels when you
use the [Touch slider bar]. When this function is off, the
[Fader] position changes only after you stop scrolling.
Motor
Turns the motor power of [Fader] on and off. When the
motor power is off, you can change the [Fader] parameter
after the [Fader] parameter value and the [Fader] position
match.
Ch Select
Turns on and off the function which allows you to select
channels by touching [Fader].
OLED Off Time
Configures the period of time that elapses before the
[Channel name display] is automatically darkened.
User Assignable Settings
Assigns the function to the buttons in “USER
ASSIGNABLE section” (page 19). First, click “Category”
to select the category. Next, click “Command” to select
the command. When you check a box in “Repeat,” the
function will operate continuously when the button is held
down.