Filter
Top Products
24
Loading discs
1 Press OPEN/CLOSE on the front of the player. The disc tray opens.
2 Load your chosen disc in the tray, label side up (also when a double sided
DVD is inserted). Make sure it is sitting properly in the correct recess.
3 Press OPEN/CLOSE, to close the tray.
➤ READ appears in the status window and on the player display, and
playback starts automatically.
Note: If ‘Child Lock’ is set to ON and the disc inserted is not in the ‘child safe’ list (not
authorized), the 4-digit code must be entered and/or the disc must be authorized
(see ‘Access Control’).
Playing a DVD-video disc
Playing a title
➤ After inserting the disc and closing the tray, playback starts automatically
and the status window and the player display show the type of disc
loaded, as well as information about the disc’s contents and playing time.
The disc may invite you to select an item from a menu. If the selections are
numbered, press the appropriate numerical key; if not, use the w/v, t/u keys
to highlight your selection, then press OK.
➤ The currently playing title and chapter number are displayed in the menu
bar and the player display.
The elapsed playing time is shown in the status window and the player
display.
● If required, you can select Stereo, Dolby Surround or 3D-Sound by using
the d (Sound) in the menu bar.
Play may stop at the end of the Title, and the player may return to the
DVD menu. To go on to the next title, press 2.
● To stop play at any other time, press 9.
➤ The default screen will appear, giving information about the current
status of the player.
● You can resume play from the point at which you stopped play. Press 2;
when you see the Resume icon . on the screen, press 2 again.
➤ The RESUME feature applies not only to the disc in the player, but
also to the last four discs you have played. Simply reload the disc and
press 2; when you see the Resume icon . on the screen , press 2
again.
Note: Since it is usual for DVD movies to be released at different times in different
regions of the world, all players have region codes. Discs can have an optional region
code. If you load a disc of a different region code into your player, you will see the
region code notice on the screen. The disc will not play and should be removed from
the player.
Operation
OPERATION
CLOSE
OPEN