Yamaha DV-S5750 DVD Player User Manual


 
18
Setup Menu
To input your favorite tracks/chapter
3 Use the numeric keypad (0-9) to enter
a valid track/chapter number.
4 Use 1 234 to move the cursor to the
next position.
If the track number is more than ten,
press T to open the next page and
proceed with programming or,
Use 1 234 to highlight {NEXT} on the
program menu, then press ENTER/
OK.
5 Repeat steps 34
to input another track/
chapter number.
If you want to remove a track
6 Use 1 234 to move the cursor to the
track you want to remove.
7 Press ENTER/OK to remove this track
from the program menu.
To start program playback
8 Use 1 234 to highlight {START} on the
program menu, then press ENTER/OK.
Playback will start with the selected
tracks under the programmed
sequence.
To exit program playback
9 Use 1 234 to highlight {EXIT} on the
program menu, then press ENTER/OK.
OSD Language
This menu contains various language
options for display language on the screen.
For details, see page 8.
Screen Saver
This function is used to turn the screen
saver on or off.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight {SCREEN SAVER}, then press 2.
ON
Select this if you wish to turn off the TV
screen when disc playback is stopped or
paused for more than 15 minutes.
OFF
Select this to disable the screen saver
function.
2 Press 34 to select a setting, then press
ENTER/OK to confirm your selection.
Sleep Timer
This feature automatically sets the DVD
player in standby mode after the amount of
time you have set.
1 In ‘GENERAL SETUP PAGE’, press 34 to
highlight {SLEEP}, then press 2.
2 Press 34 to select a setting.
You can select from 15, 30, 45 and 60
minutes. Select {OFF} to cancel the
sleep timer function.
3 Press ENTER/OK to confirm your
selection.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SETUP.