Yamakawa MP-28 DVD Player User Manual


 
Connections
7
Remote sensor and remote control
eye jack. Connect the remote control
eye jack to the remote sensor unit.
AUDIO OUT
VIDEO OUT
(Red, white)
(Yellow)
FM modulator
or Amplifier
TV or Monitor
DC 12V
REMOTE
OUT
R-AUDIO-L VIDEO
Power supply cable
DC 12V 1.5A Red (+), Black (-)
Red (+)
Black (-)
DC 12V
Connect either
Smoke plug cable
Connect the cable to the
cogarette lighter hole
1 Refer to the owner's manual for the connected monitor as well.""
2 Refer to the owner's manual of the connected equipment for additional information.
3 When you connect the DVD player to other equipment, be sure to turn off the power .
4 If you place the DVD near a tuner or radio, the radio broadcast sound might be distorted.
In this case, place the DVD player away from any other tuner or radio.
5 The output sound of the DVD player has a wide dynamic range. Be sure to adjust the
receiver's volume to a moderate listening level. Otherwise, the speakers may be damaged by
a sudden high output.
6 Turn off the amplifier before you connect or disconnect the DVD player's power leads.
If you leave the amplifier power on, the speakers may be damaged.
NOTE