Filter
Top Products
Doc# 27-0006UM Issued 11/00 Rev 1.0
23
To adjust the screen for the best
possible display, try the following:
Press the and buttons
until you have a universally fuzzy
screen.
Count the number of button
presses for the screen to go from
fuzzy to clear to fuzzy again.
Divide the number of presses by
two and press the button that
many times to precisely end up at
the clearest setting.
The clearest setting may also be
verified by visually monitoring the
screen while adjusting the settings.
Step 6: Adjust Brightness
If the brightness adjustment is made
to maximize the display visibility, press
the SELECT button until the Brt
indicator is illuminated, then use the
and buttons to increase/
decrease the display brightness. The
factory default setting is maximum
brightness.
NOTE: If at this point the screen
image is not crisp, repeat
Steps 2-4.
Step 7: Saving Adjustments
The screen settings will automatically
be saved as long as the power is
maintained for at least five seconds
after the last adjustment.
NOTE: See Saving Settings earlier
in this manual for a
complete discussion of this
subject.