Filter
Top Products
22 Plasma Display
Operation
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the G button and then use
D / E
button to select Reset.
3. Press the G button.
• You can initialize Zoom In/Out, Manual config., Position, Split zoom, PIP size, PIP posi-
tion, and sub picture size for twin picture features.
Initializing (Reset to original factory value)
Initializing (Reset to original factory value)
- You can reset values in all modes.
- To initialize the adjusted value, follow instructions below.
VIDEO
AUDIO
TIME
SCREEN
TWIN
SPECIAL
Auto config.
ARC
Zoom in/out
Position
Manual config.
Screen adj.
Reset G
XGA Mode
To set
MENU
Prev.
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the G button and then use
D / E
button to select VGA mode/XGA mode.
3. Press the G button and then use
D / E
button to select the desired VGA/XGA resolution.
4. Press the OK button to save.
Selecting W
Selecting W
ide VGA/XGA
ide VGA/XGA
mode (RGB-PC, DVI-PC mode only)
mode (RGB-PC, DVI-PC mode only)
- To see a normal picture, match the resolution of RGB XGA mode (1024x768, 1360x768, 1366x768) with the selection for XGA
mode and the resolution of RGB VGA mode (640x480, 848x480, 852x480) with the selection for VGA mode in the SCREEN
menu.
- If the input source is RGB VGA mode, the screen menu option is changed from XGA mode to VGA mode automatically.
VIDEO
AUDIO
TIME
SCREEN
TWIN
SPECIAL
Auto config.
ARC
Zoom in/out
Position
Manual config.
Screen adj.
Reset
XGA Mode G
1024x768
1360x768
1366x768
MENU
Prev.
Screen
Screen
Adjustments (V
Adjustments (V
ideo, S-V
ideo, S-V
ideo, and Component 480i mode only)
ideo, and Component 480i mode only)
- Use this function to correct jittering or picture instability during video tape playback.
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the G button and then use
D / E
button to select Screen adj..
3. Press the G button and then use
D / E
button to to select TV or VCR.
• Select the VCR option if watching a VCR.
• Select the TV option for other equipment.(Except VCR)
4. Press the OK button to save.
VIDEO
AUDIO
TIME
SCREEN
TWIN
SPECIAL
Auto config.
ARC
Zoom in/out
Position
Manual config.
Screen adj. G
Reset
YNR
TV
VCR
MENU
Prev.
Screen Menu Options continued
Screen Menu Options continued
VIDEO
AUDIO
TIME
SCREEN
TWIN
SPECIAL
Auto config.
ARC
Zoom in/out
Position
Manual config.
Screen adj.
Reset
YNR G
On
Off
MENU
Prev.
- Use YNR to reduce the picture noise which may appear on the screen.
Luminance Noise Reduction (V
Luminance Noise Reduction (V
ideo, S-V
ideo, S-V
ideo and Component 480i modes only)
ideo and Component 480i modes only)
1. Press the MENU button and then use
D / E
button to select the SCREEN menu.
2. Press the
G
button and then use
D / E
button to select YNR.
3. Press the G button and then use
D / E
button to select On or Off.
4. Press the OK button to save.