Filter
Top Products
16
VCR Operation Setup (Continued)
VCR Setup Menu Options
11
Press MENU and the MAIN menu will appear.
22
Use
vv
/
VV
to select the SETUP menu, then press
SELECT/ENTER.
The SETUP menu will appear.
33
Use
vv
/
VV
to choose a desired option on the
SETUP menu. Then use
bb
/
BB
to make adjust-
ments.
FUNCTION OSD
The on-screen display of this DVD+VCR can be turned on or off.
Use b/B to switch the FUNCTION OSD ON or OFF.
LANGUAGE SELECT
The on-screen programming menu of this DVD+VCR can be
displayed in either English, Spanish, or French.
Use b/B to select the menus language.
AUDIO MODE
The DVD+VCR has two separate audio playback systems, the
high quality VHS Hi-Fi system and standard NORMAL mono
system. The same audio is generally recorded on both
systems. The VHS Hi-Fi system plays on separate (left and
right) channels, and the NORMAL system plays monaural
sound. The normal track is always played so the cassette can
be played on a DVD+VCR that does not have VHS Hi-Fi.
AUDIO MODE can be switched between HI-FI and
NORMAL using b/B.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display to
the desired position when both MTS stereo and SAP signals are
received. When only one of the MTS signal is received, the
DVD+VCR automatically selects the corresponding receiving
mode (Stereo or SAP) regardless of the selected position. For
normal operation, the display should be in the STEREO position.
The DVD+VCR will then record a STEREO program when available,
and record a mono program IF the program is NOT IN STEREO.
For weak STEREO and/or SAP broadcasts, changing the dis-
play to mono may give clearer sound.
BROADCAST TYPE can be switched between STEREO,
SAP, and MONO using b/B.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/NORMAL) is
in HI-FI position] for selecting the audio output signals from the
AUDIO OUT terminals (L ch and R ch), and RF.OUT.
This display setting should normally be left in the stereo posi-
tion, so that when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
AUDIO OUTPUT can be switched between STEREO, LEFT,
and RIGHT using b/B.
44
Press MENU when finished.
Channel Selection
This DVD+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:
Connect the DVD+VCR to the desired type of antenna or
cable TV system, as shown in Connecting Antenna/Cable TV
to DVD+VCR on page 11.
AUTO CHANNEL PROGRAMMING
11
Press MENU and the MAIN menu will appear.
22
Use
vv
/
VV
to select the TUNING menu, then press
SELECT/ENTER.
The TUNING menu will appear.
33
Use
vv
/
VV
to choose the SOURCE SELECT option,
then use
bb
/
BB
to select TUNER.
Press b/B repeatedly to switch between TUNER, LINE1,
and LINE2.
44
Use
vv
/
VV
to choose the AUTO CHANNEL SET option,
then use
bb
/
BB
to start the channel search.
The tuner will automatically search for all available
channels in the area and place them in the tuner’s
memory.
55
After the AUTO CHANNEL SET
PROCEEDING(Channel Search) is complete,
make sure the TUNING BAND is set correctly
(TV or CATV). Use
vv
/
VV
to choose the TUNING
BAND option, then select (TV or CATV) by using
bb
/
BB
while in the TUNING menu.
Remember, TV is for the air antenna reception,
CATV is for cable or wireless cable connection.
66
Press MENU to return to the TV screen.
77
Use CH/TRK (
vv
/
VV
) or CH (
vv
/
VV
) on the front
panel to cycle the DVD+VCR through the
channels in memory.
TO ADD OR ERASE CHANNELS
This feature allows you to add or erase channels from
memory manually.
1 Use
vv
/
VV
to choose the CH. ADD/DEL option on the
TUNING menu. Use b/B to select a channel to add
or erase.
2 Use SELECT/ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase other
channels.
3 Press MENU to return to the TV screen.