Zenith Z52DC2D Projection Television User Manual


 
36 DLP Projection TV
On/Of
On/Of
f
f
T
T
imer Setup
imer Setup
Timer function operates only if current time has been set.
Off-Timer function overrides On-Timer function if they are both set to the same time.
The TV must be in standby mode for the On-Timer to work.
If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV
will automatically revert to standby mode.
Auto Clock
Manual Clock
Off Timer
On Timer
Sleep Timer
Auto Off
Auto Clock
Manual Clock
Off Timer
On Timer
G
Sleep Timer
Auto Off
Off
On
Time 6 : 30 AM
Ch. TV 2-0
Vol 17
1. Press the MENU button and then use
DD / EE
button to select the TIME menu.
2. Press the GG button and then use
DD / EE
button to select Off Timer or On Timer .
3. Press the GG button and then use
DD / EE
button to select On .
To cancel
On / Off Timer function, select Off .
4. Press the
GG button and then use
DD / EE
button to set the hour.
5. Press the
GG button and then use
DD / EE
button to set the minutes.
6. For only
On Timer function
Press the GG button and then use
DD / EE
button to select the channel at turn-on.
Press the
GG button and then use
DD / EE
button to set the sound level at turn-on.
7. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Sleep
Sleep
T
T
imer
imer
The Sleep Timer turns the TV off after a preset amount of time. Note that this setting is cleared when
the TV is turned off.
You can also set up the
Sleep Timer in the TIME menu.
1. Press the TIMER button repeatedly to select the number of minutes. First the Off option appears on the screen,
followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes.
2. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to
count down from the number of minutes selected.
3. To check the remaining minutes before the TV turns off, press the TIMER button once.
4. To cancel the Sleep Timer, press the TIMER button repeatedly to select Off .