Zenith ZRY-316 DVD Recorder User Manual


 
27
Playback
Counter Memory Function
This feature is useful if there is a section of tape you
want to view immediately after recording or if you
want to return to the same point several times.
1. Begin recording or playing a tape.
2. Press DISPLAY until the real-time counter is dis-
played on the TV screen.
3. At the point that you want to locate later, reset the
real-time counter to [0:00:00] by pressing CLEAR.
4. Continue to play or record.
5. Press STOP (x) when recording or playback fin-
ishes.
6. Press RETURN (O). The tape automatically
stops when the tape counter returns to about
[0:00:00].
S-VHS Quasi Playback (SQPB)
This Recorder can play back S-VHS recorded
tapes, however, it cannot make recordings using
S-VHS format tapes.
SQPB is an abbreviation for S-VHS Quasi
Playback.
Playing a DVD
Playing a DVD
Playback Setup
1. Press OPEN/CLOSE (Z) to open the disc tray.
Load your chosen disc in the tray, with the play-
back side down.
2. Press OPEN/CLOSE (Z) to close the tray.
Playback starts automatically. If playback does
not start, press PLAY (N).
In some cases, the disc menu might appear
instead.
Use the bB v Vbuttons to select the title/chap-
ter you want to view, then press ENTER to start.
Press TITLE or DISC MENU/LIST to return to the
menu screen.
3. To stop the playback, press STOP (x).
The unit records the stopped point, depending on
the disc. “
X
x” appears on the screen briefly.
Press PLAY (N) to resume playback (from the
scene point). If you press STOP (x) again or
unload the disc (“x” appears on the screen.), the
unit will clear the stopped point.
Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or
press POWER (1), the disc tray closes automati-
cally and unit turns off.
Notes:
If parental control is set and the disc is not within the
rating settings you must input the password.
(See [
Rating] on page 22).
DVDs may have a region code. Your Recorder will not
play discs that have a region code different from your
Recorder. The region code for this player is 1 (one).
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be avail-
able on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can move
to another title:
Press DISPLAY twice then use v / V to select the
title icon. Then, press the appropriate numbered
button (0-9) or b / B to select a title number.
Moving to another CHAPTER
When a title on a disc has more than one chapter,
you can move to another chapter as follows:
Press SKIP (> or .) briefly during playback
to select the next chapter or to return to the
beginning of the current chapter.
Press SKIP (.) twice in quick successions to
step back to the previous chapter.
•To go directly to any chapter during playback,
press DISPLAY twice and use v / V to select
the chapter icon. Input the chapter number or
use b / B.
Slow Motion
1. Press BACKWARD (m) or FORWARD (M)
during pause mode.
2. Use the BACKWARD (m) or FORWARD (M)
to select the required speed:
4 steps (forward and backward)
3. To exit Slow Motion mode, press PLAY (N).
Search
1. Press BACKWARD (m) or FORWARD (M)
during playback.
2. Press BACKWARD (m) or FORWARD (M) to
select the required speed:
5 steps (forward and backward)
3. To exit SEARCH mode, press PLAY (N).
DVD+R-R+RW-RW
Video
-RW
VR
DVD+R-R+RW-RW
Video
-RW
VR
DVD+R-R+RW-RW
Video
-RW
VR
DVD+R-R+RW-RW
Video
-RW
VR
DVD