Filter
Top Products
MC100FX-SC2/30-A User’s Guide
7
Link Fault Signaling
LFS is a function that is extremely beneficial in terms of network status monitoring. The LFS
LED will immediately light to indicate when a cable has been severed or when some other cause
of disruption in service has occurred. The LFS function monitors both copper and fiber segments
giving a total connection status report.
Set LFS to ON position for normal operational use.
Set LFS to OFF position when installing cables or when testing the network connection.
Note: The LFS feature influences both fiber and copper segments. Therefore, when disruption
occurs on either segment, the LFS feature will be activated and the LED will light to indicate that
the entire connection is down.
Rear Panel
The rear panel contains a power port, a power LED, and DIP Switches. Connect the included
power adapter (12V DC voltage with minimum 0.8A current) to the port labeled 12VDC 800mA
and connect the power adaptor to a power supply (outlet).
MC100FX-SC2-A
MC100FX-SC30-A