4
PORT COMMANDS
Use port commands to configure and manage individual ports and
load-sharing port groups.
Commands by
Usage
This chapter presents port commands alphabetically. Use Table 9 to locate
commands in this chapter based on their use.
Table 9 Port Commands by Usage
Type Command
Port Type “set port type ap” on page 82
“set dap” on page 73
“set port type wired-auth” on page 86
“clear port type” on page 61
“clear dap” on page 58
Name “set port name” on page 78
“clear port name” on page 59
State “set port” on page 76
“reset port” on page 73
“display port status” on page 66
Gigabit Interface Type “display port preference” on page 65
“set port preference” on page 80
“clear port preference” on page 60
Speed “set port speed” on page 81
Autonegotiation “set port negotiation” on page 78
PoE “set port poe” on page 79
“display port poe” on page 64
SNMP “set port trap” on page 81
