Error Messages 4-5
■ Warning level (default) displays only messages that indicate potential
problems detected by the software. The system may continue to
function, but it is recommended that you take the action specified
in the following section to correct the problem.
■ Error level displays messages that indicate a configuration error
condition. The system may not function unless the error is corrected
by reconfiguring and rebooting the system.
■ Panic level displays messages that indicate a severe problem has
been detected. The system is halted, and enters monitor mode. You
must take the specified action, and reboot the system, to bring the
system up again.
All messages are displayed with a time stamp and the text of the
message.
A detailed list of these error messages along with a brief description
and suggestions for any action you should take may be found in the
optional AccessBuilder Administrators Guide. Messages in each
category are listed in alphabetical order.
ab4kbook Page 5 Thursday, March 27, 1997 11:51 AM
