![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/95/995b7382-fac6-401d-95fa-e8ea8bc488df/995b7382-fac6-401d-95fa-e8ea8bc488df-bg14.png)
1-4
AMM-1570/1572 User’s Guide
AMM-1570/1572 User’s Guide
Stock Number: 510526-00, Rev. B Page: 1-4
Print Spec Number: 492379-00
Current Date: 3/7/94 ECN Date: 3/8/94
System Requirements
The following minimum requirements are needed to install the
AMM-1570/1572:
■ An 80386SX 25 megahertz (MHz) computer or higher
■ An available 16-bit expansion bus slot
■ Microsoft Windows 3.1 or higher
■ Four megabytes (MByte) or more of RAM
■ A Video Graphics Array (VGA) monitor and VGA display card
■ A hard disk with 10 MBytes or more of free space
■ A 3.5-inch, high-density (1.44 MByte) floppy disk drive
Board Layout
Figure 1-1 shows the location of the major components on the host
adapter.
Figure 1-1. Board Layout
J6 J5
J7
J17
J8
J9
LED Connector
Floppy Drive
Connector
(AMM-1572 Only)
Internal
SCSI
Connector
External
SCSI
Connector
BIOS
DSP Chip Bus Interface Chip
Sound Chip
AIC-6360 SCSI Protocol Chip
Terminators
Floppy Drive Controller
AMM-1572 Onl
Headphones/
Speakers
Line In
Line Out
Microphone
Joystick/
MIDI Port
CD Audio Input
Connector
Wavetable ROM
J4