5-8
ANA-5910/5930/5940 User’s Guide
Reconfiguring a LANE Client
To reconfigure a LANE client:
1
From the Control Panel window, double-click on the Network
icon.
2
From the Network Settings dialog box, select the Adapters tab.
3
Select the LANE adapter you want to reconfigure, for example,
Adaptec LANE Adapter (ELAN 0), and then select Properties.
The Adaptec LANE Configuration dialog box appears.
4
Set the editable parameters as described in the sections above.
Removing a LANE client
1
From the Control Panel window, double-click on the Network
icon.
2
From the Network Settings dialog box, select the Adapters tab.
3
Select the LANE adapter you want to remove, such as Adaptec
LANE Adapter (ELAN 0), from the Installed Adapter Cards
drop-down list, and then select Remove.
4
Select Yes.
5
In the Network Settings dialog box, select Close.
6
Select Yes to save and initialize changes.
