4-22
PCI Ethernet and Fast Ethernet Adapters
PCI Ethernet and Fast Ethernet Adapters User’s Guide
Stock Number: 511472-00, Rev. A Page: 4-22
Print Spec Number: 496708-00
Current Date: 5/5/97 ECN Date: 5/97
NDIS 2.0
Note:
Consult the \readme\ndis.txt file for the latest driver
information and installation instructions. Some procedures
or information may have changed or may not have been
available when this user’s guide was printed.
The NDIS 2.0 driver for DOS is in the
\ndis.dos
directory. The NDIS
2.0 driver for OS/2 is in the
\ndis.os2
directory. The Microsoft LAN
Manager installation file is in the
\mslanman.dos
directory tree.
Here is a partial list of products that use the NDIS driver:
■
Microsoft LAN Manager
■
Artisoft Lantastic
■
IBM DOS LAN Requester
■
IBM OS/2 Warp Connect
■
DEC
PATHWORKS for DOS
■
SunSoft PC-NFS
■
Banyan
VINES Client
■
Various brands of TCP/IP
The DOS NDIS driver is compatible with DOS memory managers
such as
emm386
and can be loaded into high memory. In addition,
the driver is compatible with Windows 3.0 and later. The NDIS 2.0
driver will also work with any other OS that complies with NDIS 2.0
specifications.
Installing With LAN Manager
Follow the instructions below to install the NDIS driver for LAN
Manager, OS/2 Warp, and others.
1
Boot your system.
2
Run your network operating system's setup program
according to the documentation provided with your network
operating system software.
3
When prompted, insert the driver diskette in drive A.
4
Enter information as required.
5
Exit your network operating system's setup program.
