16
End of the wash cycle/Removing the washing
When the programme has finished, (END) will illuminate on the pro-
gramme progress display. The door can be opened as soon as the in-
dicator (DOOR) is lit green.
1.Open the door and remove the washing.
2.Turn the programme knob to (OFF).
3.When you have finished washing, pull out the detergent drawer a little
to let it to dry out. Keep the door very slightly open so that the washing
machine can air.
If
(RINSE HOLD) has been selected:
Following a rinse hold (END) will be lit on the programme progress
display.
The water must first be drained off:
– Either turn the programme knob to (OFF), then to (DRAIN) and
press the button (START/PAUSE) (the water will be drained
without spinning),
– turn the programme knob to (OFF) and then to (SPIN). Change
the spin speed, if necessary, and press the button (START/
PAUSE) (the water will be drained and the washing spun).
