A SERVICE OF

logo

KM0832 User Manual
14
Rack Mounting – Rear
1. Remove the two screws from the sides at the rear of the unit. (See Step 1
under Rack Mounting – Split, page 11.)
2. Use the M3 x 8 Phillips head hex screws supplied with the rack mounting
kit to screw the rack mounting brackets into the sides at the rear of the
unit.
3. Place the KVM switch in the rack. Position it so that the holes in the
mounting brackets line up with those in the rack. Secure the mounting
brackets to the rear of the rack.
Phillips head hex
M3 x 8