Display Keys Page 50
2420 User Guide Page 50
IP Office 40DHB0002USEG - Issue 1 (29/04/2003)
RngOf - Ringer Off (!)
Switch the phones audible ringer on/off.
This function does not require any data entered when programmed. This
function can be programmed through the phone by the user using an
Admin key.
The programmed
RngOf key toggles the phones call ringer on/off.
When off, RngOf is shown with a
symbol.
[User | Button Programming | Emulation | Ringer Off]
See also:
• "CWOn - Call Waiting On" on page 30.
• "HfAns - Internal Auto-Answer (!)" on page 38.
SAC - Send All Calls (!)
Switch do not disturb on/off.
This function does not require any data entered when programmed. This
function can be programmed through the phone by the user using an
Admin key.
The
SAC key switches "do not disturb" on/off. When on, SAC is shown
with a
symbol and the display includes an N (No calls).
When SAC is on, callers receive busy tone or are diverted to voicemail. For
each user the System Administrator can set which numbers can still call
when SAC is on. If the extension user has Phone Manager, they can set
those numbers themselves.
[User | Button Programming | Emulation | Send All Calls]
See also:
• "DNDOn - Do Not Disturb On" on page 32.
Spres - AD Suppress (!)
Replace the display of dialed digits with s characters.
This function does not require any data entered when programmed. This
function can be programmed through the phone by the user using an
Admin key.
The programmed
Spres key toggles the display of dialed digits on/off.
When on, Spres is shown with a
symbol and dialed digits are replaced by
s on the display.
[User | Button Programming | Emulation | AD Suppress]
