20 - EN
Time delay
Withthe“Timedelay”functionyoucan
delay the program start up to 24 hours.
Setting can be made in intervals of 30
minutes.
1. Opentheloadingdoor,placethe
laundry inside and fill detergent
drawer.
2. Set the washing program,
temperature, spin speed and,
if required, select the auxiliary
functions.
3. Press“Timedelaying”buttons
“+”and“-”(Figure2-8)toset
your desired time delay. The Time
delayingsymbol(Figure3-13h)will
flash.
4. Press“Start/Pause/Cancel”button
(Figure2-10).Thenthetimedelay
starts to count down. The Time
delayingsymbol(Figure3-13h)will
lightup.TheStartsymbol(Figure
3-13j)willlightup.
The“:”inthemiddleofthedisplayed
time delay will start to flash.
• Morelaundrymaybeloadedor
taken out during the time delay
period. At the end of the time delay
countdown process, time delaying
symbol(Figure3-13h)fadesand
the washing starts as the program
duration is displayed.
Changing the delay time
If you want to change the time during
thecountdown:
1. Press“Start/Pause/Cancel”button
(Figure2-10).“:“inthemiddleof
the screen will stop flashing. The
Standbysymbol(Figure3-13k)will
light up. The Time delaying symbol
(Figure3-13h)willflash.TheStart
Symbol(Figure3-13j)willfade.
2. Press“Timedelaying”buttons“+”or
“-”(Figure2-8)tosetyourdesired
time delay.
3. Press“Start/Pause/Cancel”button
(Figure2-10).TheTimedelaying
symbol(Figure3-13h)willlightup.
TheStandbysymbol(Figure3-13k)
willfade.TheStartsymbol(Figure
3-13j)willlightup.
4. The“:”inthemiddleofthedisplayed
time delay will start to flash.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
1. Press“Start/Pause/Cancel”button
(Figure2-10).The“:”inthemiddle
of the displayed time delay will stop
flashing.
2. Startsymbol(Figure3-13j)willfade.
Thestandbysymbol(Figure3-13k)
andthetimedelayingsymbol(Figure
3-13h)willflash.
3. Presstimedelayingbutton“-”
(Figure2-8)todecreasethedesired
timedelay.Programdurationafter
30 minutes shall be displayed.
4. PressStart/Pause/CancelButton
(Figure2-10)tostarttheprogram.
Starting the Program
1. PressStart/Pause/Cancelbutton
(Figure2-10)tostarttheprogram.
2. Thestartsymbol(Figure3-13j)
which indicates that the program
has started will light up.
3. The door locks and the door locked
symbol(Figure3-13i)willlightup.
4. The Symbol of the relevant step
(prewash,mainwash,rinse,softener
andspin)thattheprogramhas
startedfromwilllightup(Figure
3-13f).
Progress of program
The progress of a running program is
shown through a number of symbols on
the screen.
• At the beginning of each program
step, the relevant symbol in the
series of symbols will light up and
thus, at the end of the program,
all symbols will remain lit up. The
symbol that lights up at the far right
of the series of symbols indicates
the step that is being carried out.