13
Configuring Your Computer in Windows 2000
1. Access your network settings by clicking Start, then choose Settings and
then select Control Panel.
2. In the Control Panel, locate and double-click the Network and Dial-up
Connections icon.
3. Locate and double-click the
Local Area Connection icon
for the Ethernet adapter that
is connected to the Wireless
Router. When the Status dialog
box window opens, click the
Properties button.
4. In the Local Area Connection
Properties box, verify the box
next to Internet Protocol (TCP/
IP) is checked. Then highlight the
Internet Protocol (TCP/IP), and
click the
Properties button.
5. Select Obtain an IP address
automatically to configure your
computer for DHCP. Click the
OK button to save this change and close the
Properties window.
6. Click the
OK button again to save these new changes.
7. Reboot your PC.
8. To obtain new network settings see See “Obtain IP Settings from Your IEEE
802.11g Wireless Router” on the next page.
